Search results for "Waste heat"
showing 10 items of 45 documents
Electrical power production from low-grade waste heat using a thermally regenerative ethylenediamine battery
2017
Abstract Thermally regenerative ammonia-based batteries (TRABs) have been developed to harvest low-grade waste heat as electricity. To improve the power production and anodic coulombic efficiency, the use of ethylenediamine as an alternative ligand to ammonia was explored here. The power density of the ethylenediamine-based battery (TRENB) was 85 ± 3 W m−2-electrode area with 2 M ethylenediamine, and 119 ± 4 W m−2 with 3 M ethylenediamine. This power density was 68% higher than that of TRAB. The energy density was 478 Wh m−3-anolyte, which was ∼50% higher than that produced by TRAB. The anodic coulombic efficiency of the TRENB was 77 ± 2%, which was more than twice that obtained using ammon…
On the regeneration of thermally regenerative ammonia batteries
2018
In the past few years, thermally regenerative ammonia battery (TRAB) has been proposed as an effective tool to recover waste heat at temperatures below 130 °C. Most of the literature available is devoted to the power production step, with less attention being given to the regeneration step (e.g. the removal of ammonia from the anolyte). In this paper, the TRAB is analyzed with particular attention to the regeneration step and to the study of various generation of energy-regeneration cycles. It was shown that approximately 90 °C is necessary for the regeneration step due to the fact that ammonia is present in the anolyte mainly as a complex. Various cycles were performed with success, demons…
Development of a membrane-less microfluidic thermally regenerative ammonia battery
2021
Thermally regenerative ammonia battery is a promising approach to make use of waste heat and generate electrical energy. However, according to literature, the price of the energy obtained by this device is much higher than alternative renewable technologies (such as wind, solar, geothermal, etc.). To make the process more viable for applicative purposes, it would be necessary to reduce dramatically the cost of the membrane or to avoid it. Hence, the aim of the present work is to increase the economic figures of thermally regenerative ammonia battery avoiding the use of membranes. It was concluded that this result can be obtained by developing the process in a microfluidic flow cell with lam…
Reverse electrodialysis heat-engine: Case studies of improving energy efficiency through recovery of low temperature excess heat
2018
Reverse Electrodialysis (RED) is a technology for generating electricity from the difference in salinity between two solutions. RED is usually applied to natural water streams with different salinities, like seawater vs. freshwater. In the RED Heat-to-Power project we explore the option of using artificial water solutions operating in a closed loop where the difference in salinity is regenerated in a separation step powered by heat at temperature ranges between 60 and 100°C. We call this system Reverse Electrodialysis Heat Engine (RED HE). In this paper, first we summarise the possible system configurations and the overall amount of excess heat available in Europe for powering the RED HE pr…
CLOSING THE LOOP: STUDY OF INTEGRATED CYCLES WITH NATURAL AND ARTIFICIAL SOLUTIONS FOR THE PRODUCTION OF ENERGY, MINERALS AND FRESH WATER
Salinity gradient engines
2016
Abstract This chapter is devoted to the description of a new class of heat engines based on salinity gradient technology and able to convert low-grade heat into power. The salinity gradient power (SGP) process is employed within a closed loop composed of two different sections: (i) the SGP unit devoted to the energy production, and (ii) a regeneration unit fed by the solutions exiting from the SGP unit and able to restore the initial concentration, thus regenerating the salinity gradient. The main features, limits and perspectives of this novel heat engine are described along with an overview of the state of the art presented in the literature and an example of exergetic analysis of the cyc…
Reverse electrodialysis heat engine for sustainable power production
2017
Abstract Reverse Electrodialysis Heat Engine (REDHE) is a promising technology to convert waste heat at temperatures lower than 100 °C into electric power. In the present work an overview of the possible regeneration methods is presented and the technological challenges for the development of the RED Heat Engine (REDHE) are identified. The potential of this power production cycle was investigated through a simplified mathematical model. In the first part of the work, several salts were singularly modelled as possible solutes in aqueous solutions feeding the RED unit and the corresponding optimal conditions were recognized via an optimization study. In the second part, three different RED He…
Societal and economic aspects of a novel circular system for the valorisation of desalination brine and waste heat from a power plant
2022
Direct disposal of concentrate brines produced in industrial plants can have a relevant impact to environmental systems. For this reason, brine treatment and valorisation could help to avoid disposal and produce marketable salts, thus representing a possible economic benefit. With this aim, a novel process, where advanced separation technologies are combined with waste heat recovery, is proposed within the EU-funded WATER MINING project. The Case Study presented in this work concerns the power plant in Lampedusa island, where waste heat and desalination brine are available to implement the process via a pilot plant to be installed for alternative thermal treatment of the brine. The aim is t…
Evaluation of the Economic and Environmental Performance of Low-Temperature Heat to Power Conversion using a Reverse Electrodialysis – Multi-Effect D…
2019
In the examined heat engine, reverse electrodialysis (RED) is used to generate electricity from the salinity difference between two artificial solutions. The salinity gradient is restored through a multi-effect distillation system (MED) powered by low-temperature waste heat at 100 °C. The current work presents the first comprehensive economic and environmental analysis of this advanced concept, when varying the number of MED effects, the system sizing, the salt of the solutions, and other key parameters. The levelized cost of electricity (LCOE) has been calculated, showing that competitive solutions can be reached only when the system is at least medium to large scale. The lowest LCOE, at a…
Membrane distillation: Solar and waste heat driven demonstration plants for desalination
2013
Abstract The development of small to medium size, autonomous and robust desalination units is needed to establish an independent water supply in remote areas. This is the motivation for research on alternative desalination processes. Membrane distillation (MD) seems to meet the specific requirements very well. This work is focused on experimental studies on full scale demonstration systems, utilizing a parallel multi MD-module setup. Three different plant concepts are introduced, one of them is waste heat driven and two of them are powered by solar thermal collectors. Design parameters and system design are presented. After the analysis of plant operation a comparison among the plants as we…